Juki DDL-8700 105 mm Motor Pulley — MTKP0100000
105 mm outside-diameter motor pulley reference MTKP0100000 appears in Juki's DDL-8700 clutch-motor drive table. Shaft fit and M-type V-belt configuration must be confirmed before sourcing.
Part or system reference is supported by manufacturer specifications or specialist supplier documentation. Stock, supply type and final compatibility are confirmed at quote time.
Part details
- Brand
- Juki
- Category
- Motor Pulleys
- Part reference
- MTKP0100000
- Availability
- Source on request
The Juki DDL-8700 instruction manual, section 23 (Motor Pulleys and Belts), lists motor pulley MTKP0100000 with a 105 mm outside diameter. Its reference configuration uses a standard 400 W clutch motor and M-type V-belt. The same table pairs this pulley with a 1067 mm (42-inch) belt, reference MTJVM004200.
The manual's speed table associates the 105 mm pulley with approximately 4,250 stitches per minute at 50 Hz and 5,040 at 60 Hz under its stated drive configuration. These are manufacturer reference values, not performance guarantees for modified machines. An installed servo motor, alternative motor pulley or different table geometry can require a different pulley and belt.
Before requesting supply, identify the motor type, measure the existing pulley outside diameter and shaft bore, and check the fastening method, belt profile and belt length. The DDL-8700 machine name alone is not sufficient to confirm motor-shaft fit. This is a reference-based sourcing record, not an assertion of OEM supply or stock. Browse /parts/motor-pulleys or /models/juki-ddl-8700, or send measurements via /find-my-part.
Compatibility
105 mm motor pulley MTKP0100000 appears in DDL-8700 instruction manual section 23 for a clutch-motor M-type V-belt configuration. Motor shaft and mounting fit not guaranteed.
Verify the reference
How to check this part before requesting a quote
Use the complete machine model together with part reference MTKP0100000 as the main matching information. If the old component has no readable number, send clear photos of the complete part and the machine identification plate. Similar-looking components can belong to different machine revisions, so visual similarity alone should not be treated as final compatibility.
Sourcing notes
Juki DDL-8700 105 mm Motor Pulley — MTKP0100000 sourcing information
This catalogue record places Juki DDL-8700 105 mm Motor Pulley — MTKP0100000 in the Motor Pulleys category and links it to Juki DDL-8700. SA Sewing uses the model, reference number and supplied photos to narrow the match. Availability, supply type and any final compatibility notes are confirmed before an order is accepted.
Related parts and verified references
Related Juki DDL-8700 parts
View all model parts →
Bobbin Cases
Juki DDL-8700 Bobbin Case Assembly — B1837-012-0A0
B1837-012-0A0
Accessories
Juki DDL-8700 Hand Wheel — 229-27206
229-27206

Rotary Hooks
Juki DDL-8700 Hook Assembly — B1830-127-0A0
B1830-127-0A0
Accessories
Juki DDL-8700 Main Shaft — 229-03009
229-03009